Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
reference:programmable-logic:zybo:reference-manual [2019/07/31 19:26]
Arthur Brown [16 Pmod Ports]
reference:programmable-logic:zybo:reference-manual [2019/07/31 19:37] (current)
Arthur Brown [16 Pmod Ports]
Line 582: Line 582:
 Pmod ports are 2x6, right-angle,​ 100-mil spaced female connectors that mate with standard 2x6 pin headers. Each 12-pin Pmod port provides two 3.3V VCC signals (pins 6 and 12), two Ground signals (pins 5 and 11), and eight logic signals, as shown in Fig. 16. The VCC and Ground pins can deliver up to 1A of current, but care must be taken not to exceed any of the power budgets of the onboard regulators or the external power supply. ​ Pmod ports are 2x6, right-angle,​ 100-mil spaced female connectors that mate with standard 2x6 pin headers. Each 12-pin Pmod port provides two 3.3V VCC signals (pins 6 and 12), two Ground signals (pins 5 and 11), and eight logic signals, as shown in Fig. 16. The VCC and Ground pins can deliver up to 1A of current, but care must be taken not to exceed any of the power budgets of the onboard regulators or the external power supply. ​
  
-**Warning:​** //Since the Pmod pins are connected to Zynq pins using a 3.3V logic standard, care should be taken not to drive these pins over 3.465V.//+**Warning:​** //Since the Pmod pins are connected to Zynq PL I/O pins using a 3.3V logic standard, care should be taken not to drive these pins over 3.4V.//
  
 {{ :​zybo:​pmod1f.png?​300 |}} {{ :​zybo:​pmod1f.png?​300 |}}