Cmod S7

Store Reference Manual Technical Support
Cmod S7
Breadboardable Spartan-7 FPGA Module
Features
  • Full support for Vivado, including tool integration, example projects and tutorials
  • Breadboardable with 48-pin DIP form factor header
  • Pmod connector for add-on hardware devices
  • Programmable from JTAG and Quad-SPI flash
Key FPGA Specifications
Part Number
XC7S25-1CSGA225C
Logic Slices
3,650
6-input LUTs
14,600
Flip-Flops
29,200
Block RAM
1,620 Kb
DSP Slices
80
Clock Resources
3 PLLs
3 MMCMs
12 MHz external clock
Internal ADC
Dual-channel, 1 MSPS, connected to DIP pins 32 and 33
Connectivity and On-board I/O
USB
USB-UART
USB-JTAG programmer
Pmod Connectors
1
Other Connectors
48-pin DIP form factor header with 36 pins populated
Buttons
2 Push buttons
LEDs
4 LEDs, 1 RGB LED
Electrical
Power Inputs
USB or 5V external source connected to DIP pin 24
Logic Level
3.3V
Physical
Width
0.7 in (1.78 cm)
Length
3.05 in (7.75 cm)

The Digilent Cmod S7 is a small, 48-pin DIP form factor board built around a Xilinx Spartan 7 FPGA. 32 FPGA digital I/O signals, 2 FPGA analog input signals, an external power input rail, and ground are routed to 100-mil-spaced through-hole pins, making the Cmod S7 well suited for use with solderless breadboards. At just 0.7” by 3.05” inches, it can be loaded in a standard socket and used in embedded systems. The board also includes a programming ROM, clock source, USB programming and data transfer circuit, power supplies, LEDs, and buttons.




Documentation

Tutorials

Example Projects

Additional Resources