Pmod SSR

Store Reference Manual Technical Support
Pmod SSR
Solid State Relay
Features
  • 0-48 V blocking voltage
  • Can switch up to 6 Arms continuous current
  • 2500 V input/output isolation
  • Low on resistance with fast turn on/off
  • Onboard LED to indicate on/off state
  • Onboard terminal block for easy wire connection
  • Follows the Digilent Pmod Interface Specification Type 1
Electrical
Bus
Logic Level
3.3V
Physical
Width
1.7 in (4.32 cm)
Length
0.80 in (2.03 cm)
Overall Height
0.75 in (1.905 cm)
Documentation
Reference Manual
Schematic
J1 Pinout
Pin 1
ON
Pin 2
NC
Pin 3
NC
Pin 4
NC
Pin 5
GND
Pin 6
VCC

The Digilent Pmod SSR (Revision B) is a solid state relay that features IXYS' CPC1908J. The Pmod SSR uses a switch controlled by a single GPIO pin and is rated to block up to 48 Volts and switch up to 6 Arms continuous current.



Tutorials

Example Projects

Microprocessor
Programmable Logic

Additional Resources