Pmod PMON1

Store Reference Manual Technical Support
Pmod PMON1
Power Monitor
Features
  • Monitor current draw less than 1.058 A
  • Wide range of configurable alert conditions
  • Monitor voltages from 3.16 V to 26 V
  • Configurable device address for up to nine modules in a single system
  • 2×4-pin connector with I2C interface
Electrical
Bus
Logic Level
3.3V
Physical
Width
1.2 in (3.05 cm)
Length
0.80 in (2.03 cm)
Documentation
Primary IC
Reference Manual
Schematic
J1 Pinout
Pin 1 & 2
CONV
Pin 3 & 4
ALERT
Design Resources
Fritzing Part
J2 Pinout
Pin 1 & 2
SCL
Pin 3 & 4
SDA
Pin 5 & 6
GND
Pin 7 & 8
DVDD
J3 Pinout
Pin 1
VIN
Pin 2
GND
Pin 3
VOUT

The Digilent Pmod (Revision B) employs the Analog Devices AD5112 and ADM1191 to create a system power monitor.



Tutorials


Example Projects


Additional Resources