Pmod LS1

Store Reference Manual Technical Support
Pmod LS1
Infrared Light Detector
Features
  • Infrared light detector with on-board sensitivity adjustment
  • Interface with up to four reflective or transmissive photo detectors
  • Works with Digilent IR Proximity Sensor
  • 6-pin Pmod connector with GPIO interface
Electrical
Bus
Logic Level
3.3V
Physical
Width
1.4 in (3.56 cm)
Length
0.80 in (2.03 cm)
Documentation
Primary IC
Reference Manual
Schematic
J1 Pinout
Pin 1
S1
Pin 2
S2
Pin 3
S3
Pin 4
S4
Pin 5
GND
Pin 6
VCC
J2 Pinout
Pin 1
GND
Pin 2
VCCB
Pin 3
GND
Pin 4
BIO1/TMS
Pin 5
GND
Pin 6
BIO4/TCK
Pin 7
GND
Pin 8
BIO3/TDO
Pin 9
GND
Pin 10
BIO2/TDI
Pin 11
GND
Pin 12
NC
Pin 13
GND
Pin 14
SRST
J3 Pinout
Pin 1
BIO1/TMS
Pin 2
BIO5/SRST
Pin 3
BIO2/TDI
Pin 4
BIO6
Pin 5
BIO3/TDO
Pin 6
BIO7
Pin 7
BIO4/TCK
Pin 8
BIO8
J4 Pinout
Pin 1
VCCB
Pin 2
GND
Design Resources
Fritzing Part

The Digilent PmodLS1 (Revision B) allows users to receive signals from multiple optical sensors, such as the popular combination of an IR LED with an IR sensor used in line-following robots.



Tutorials


Example Projects

Microprocessor
Reference Projects

Additional Resources