Pmod IA
Store
Reference Manual
Technical Support
Pmod IA
Impedance Analyzer
Features
- Impedance analyzer with 12-bit impedance converter
- Measure impedance values ranging from 100Ω to 10 MΩ.
- Programmable frequency sweep
- Programmable gain amplifier
- Optional external clock generation
- 2×4-pin port with I²C interface
- Follows the Digilent Pmod Interface Specification
Physical
Width
1.6 in (4.06 cm)
Length
0.80 in (2.03 cm)
J1 Pinout
Pin 1 & 5
SCL
Pin 2 & 6
SDA
Pin 3 & 7
GND
Pin 4 & 8
VCC
The Digilent Pmod IA (Revision A) is an impedance analyzer built around the Analog Devices AD5933 12-bit Impedance Converter.
Tutorials
Example Projects
Microprocessor
- Library and MPIDE Example – Note: this library is still in development and unverified at this point in time
- Example Raspberry Pi code from a Digilent Forum user – This example code for the Pmod IA was developed by user mbvalentin on the Digilent Forum here.
