Pmod CON3

Buy Reference Manual Technical Support
Pmod CON3
R/C Servo Connectors
Features
  • Four standard 3-wire servo motor connectors
  • Easily interface with Digilent system boards
  • Flexible power delivery to servos
  • 6-pin Pmod port with GPIO interface
Electrical
Bus
Specification Version
1.2.0
Logic Level
3.3V
Physical
Width
1.0 in (2.54 cm)
Length
0.80 in (2.03 cm)
Design Resources
Fritzing Part
Documentation
Reference Manual
Schematic
J1 Pinout
Pin 1
P1
Pin 2
P2
Pin 3
P3
Pin 4
P4
Pin 5
GND
Pin 6
VCC

The Digilent Pmod CON3 (Revision C) can be used to easily interface with up to four small servo motors that deliver anywhere from 50 to 300 ounce/inches of torque such as those used in radio controlled airplanes or cars as well as some mechatronics projects.



Example Projects

Programmable Logic
Reference Projects

Additional Resources

  • Specification Version 1.2.0: PDF