OpenLogger

Store Getting Started Reference Manual Technical Support
OpenLogger
Wireless data logging and data acquisition device
Design Resources
Pinout Printout
OpenLogger Pinout
Connectivity
  • Wifi (802.11g)
  • USB 2.0 (High Speed Required)
Analog Inputs
Channels
8
Resolution
16-bit
ENOB
12-bit
Sample Rate
400 kS/s
Bandwidth
50 kHz
Input Impedance
1 MΩ
Voltage Range
±10V
Max Buffer Size
32640 Samples per channel
Function Generator
Channels
1
Resolution
10-bit
Sample Rate
2 MS/s
Bandwidth
1 MHz at -3dB
Voltage Range
3V peak-to-peak ±1.5V offset.
Max Current Output
20 mA
Digital IO
Channels
2
Power Supply
Power Supply
Voltage Range
±4
Current
50 mA per channel
Misc
  • USB powered device (B Micro)
  • Accepts external power between 5.5 and 17 V
  • 4 indicator LEDs
Software
WaveForms Live
Digilent Agent
Supported OSs
Windows Only
Firmware
Without Bootloader
Pinout
AI#
Analog Inputs 1-8
AGND #
Analog Grounds 1-8
DIO #
Digital IO 0-7
GND
Digital Ground
5V
5V Supply
AWG
Function Generator Output
DC1
DC Out 1
DC2
DC Out 2
RST
Button Reset
PROG
Button Program
Tin
Reserved
Tout
Reserved

OpenLogger is a wireless data logging and data acquisition device that can be controlled via USB or WiFi. Using a computer or mobile device, signals from circuits and sensors can be acquired, stored, analyzed, visualized, and generated. OpenLogger makes it easy to monitor multiple analog inputs and simultaneously log the data to an SD card, and/or stream over USB or WiFi, all through WaveForms Live.




Getting Started Guide

Documentation

Tutorials

Example Projects

Accessories

OpenLogger Screw Terminal Adapter: Purchase through the OpenLogger Crowd Supply Campaign. Additional information can be found in the Screw Terminal Adapter's Reference Manual.

Additional Resources

Downloads