Cmod A7

Buy Reference Manual Technical Support
Cmod A7
Breadboardable Artix-7 FPGA Module
Features
  • Programmable over JTAG and Quad-SPI Flash
  • 1 MSPS on-chip ADC
Key Specifications
LUTs
10,400 (15T)
20,800 (35T)
Flip-flops
20,800 (15T)
41,800 (35T)
Block RAM
112.5KB (15T)
225KB (35T)
SRAM
512KB with an 8-bit bus
and 8ns access time
Quad-SPI Flash
4MB
Connectivity and Onboard I/O
Pmod Connectors
1 with 8 Digital I/O
Connectors
48-pin DIP with 44 Digital I/O
and 2 Analog inputs (0-3.3V)
Buttons
2
LEDs
2
RGB LED
1
Electrical
Power
USB or external 3.3-5.5V supply
Physical
Width
0.7 in
Length
2.75 in
Design Resources
3D Model
Mechanical Dimensions
Documentation
Primary IC
Reference Manual
Schematic

The Cmod A7-15T variant is now retired and no longer for sale in our store. The Cmod A7-35T is still available.

The Digilent Cmod A7 is a small, 48-pin DIP form factor board built around a Xilinx Artix 7 FPGA. The board also includes a USB-JTAG programming circuit, USB-UART bridge, clock source, Pmod host connector, SRAM, Quad SPI Flash, and basic I/O devices. These components make it a formidable, albeit compact, platform for digital logic circuits and Microblaze embedded softcore processor designs alike. There are 44 Digital FPGA I/O signals and 2 FPGA Analog inputs that are routed to 100-mil-spaced through-hole pins so that you can integrate your programmable logic design directly into a solderless breadboard circuit. At just .7” by 2.75” inches, it can also be loaded in a standard socket and used in embedded systems.



Documentation

Note: Xilinx software tools are not available for download in some countries. Prior to purchasing the Cmod A7, please check the supporting software's availability, as it is required for the board's use.


Tutorials


Example Projects

Additional Resources