- Wifi (802.11g)
- USB 2.0 (High Speed Required)
- Accepts USB power (Micro B)
- Accepts external power between 5.5 and 17 V
Despite our hopes and effort to create an innovative and low-cost T&M solution, we’ve received consistent negative feedback on the OpenScope MZ and OpenLogger regarding overall reliability that has led us to determine that it is not up to our high standards for our test and measurement products.
Unfortunately, we are unable to fix many of the issues, so we have made the difficult decision to pull both products, and related accessories from our shelves. This will allow us to ensure we can continue to deliver on the Digilent brand promise and focus our efforts on expanding our popular and core line of Test and Measurement Products.
The materials on this page will remain here as legacy sources. Any Digilent provided support for this material will be extremely limited at best. Thank you for understanding.
OpenLogger is a wireless data logging and data acquisition device that can be controlled via USB or WiFi. Using a computer or mobile device, signals from circuits and sensors can be acquired, stored, analyzed, visualized, and generated. OpenLogger makes it easy to monitor multiple analog inputs and simultaneously log the data to an SD card, and/or stream over USB or WiFi, all through WaveForms Live.
WaveForms Live Instrument Guides
Screw Terminal Adapter
The Screw Terminal Adapter breaks out the OpenLogger's pins to screw terminals, so that they can be attached solidly to an external circuit.
For more information, see the Screw Terminal Adapter Reference Manual, and its page on the Digilent Store.