Nexys Video

Store Reference Manual Technical Support
Nexys Video
Artix-7 FPGA
Features
  • Programmable over JTAG and Quad-SPI Flash
  • On-chip analog-to-digital converter
Key Specifications
Logic Slices
33,650 (4 6-input LUTs &
8 flip-flops each)
Block RAM
13Mbits
Clock Tiles
10 (each with PLL)
DSP Slices
740
Internal clock
450MHz+
Transceivers
3.75Gbps GTP transceivers
DDR3
512MB 800MHz
Quad-SPI Flash
32MB
Ethernet
10/100/1000 PHY w/
included unique MAC address
Connectivity and Onboard I/O
SD
microSD slot for non-volatile storage
Pmod Connectors
3 Pmod ports
HDMI
HDMI sink and HDMI source
Audio
240-bit codec w/ four 3.5mm jacks
Display
128×32 monochrome OLED
Switches
8
Buttons
5
LEDs
8
Electrical
Power
Powered from any 12V source
Logic Level
3.3V
Physical
Width
5.3 in
Length
5.3 in
Design Resources
Master XDC
ZIP
Documentation
Primary IC
Artix-7 (XC7A200T-1SBG484C)
Reference Manual
Schematic

The Nexys Video board is a complete, ready-to-use digital circuit development platform based on the latest Artix-7™ Field Programmable Gate Array (FPGA) from Xilinx®. With its large, high-capacity FPGA (Xilinx part number XC7A200T-1SBG484C), generous external memories, high-speed digital video ports, and 24-bit audio codec, the Nexys Video is perfectly suited for audio and video processing applications. Several built-in peripherals, including Ethernet, USB-UART, and a high bandwidth USB data transfer protocol, expand the connectivity of the Nexys Video so that it can be cleanly integrated as a single component of a large system. The Nexys Video also includes provisions for direct human interaction with a connector for USB-HID devices, an OLED Display, and a vast assortment of switches, buttons, and LEDs. Lastly, the FMC and Pmod ports can be used to add virtually any functionality or connection interface your application demands.



Tutorials

Example Projects


Additional Resources