NetFPGA-1G-CML

Store Reference Manual Technical Support
NetFPGA-1G-CML
Kintex-7 FPGA Development Board
Key Specifications
Logic Cells
50,950 slices,
(4 6-input LUTs & 8 flip-flops each)
DDR3
512MB dynamic RAM (800MHz)
QDRII+
4.5MB static RAM (450MHz)
BPI Flash
1-Gbit BPI Flash
Oscillator
Low-jitter 200MHz
Block RAM
16Mbit
DSP Slices
840
CMTs
10 with 1 PLL and one
mixed-mode clock manager each
Ethernet
10/100/1000 PHYS with RGMII
Encryption
AES bitstream encryption and
SHA-256 authentication w/
battery-backed encryption key
Connectivity and On-board I/O
Pmod Connectors
2 Pmod ports
PCI
Gen 2 PCI Express
Microcontroller
32-bit PIC microcontroller
FMC
High pin count FMC connector
(100 select I/O and
4 GTX serial pairs)
I/O
400 select I/O ports
(250 high range, 150 high speed)
Buttons
4
LEDs
4
SD
SD card slot
Electrical
Power
12V 5A or greater power source
Logic Level
3.3V
Physical
Width
4.2 in
Length
7.2 in
Design Resources
Documentation
Primary IC
Kintex-7 (XC7K325T-1FFG676)
Schematic

The NetFPGA-1G-CML is a versatile, low-cost network hardware development platform featuring a Xilinx® Kintex®-7 XC7K325T FPGA and includes four Ethernet interfaces capable of negotiating up to 1 GB/s connections. 512 MB of 800 MHz DDR3 can support high-throughput packet buffering while 4.5 MB of QDRII+ can maintain low-latency access to high demand data, like routing tables. Rapid boot configuration is supported by a 128 MB BPI Flash, which is also available for non-volatile storage applications. The standard PCIe form factor supports high speed x4 Gen 2 interfacing. The FMC carrier connector provides a convenient expansion interface for extending card functionality via Select I/O and GTX serial interfaces. The FMC connector can support SATA-II data rates for network storage applications. The FMC connector can also be used to extend functionality via a wide variety of other cards designed for communication, measurement, and control.



Tutorials


Example Projects


Additional Resources