Anvyl

Store Reference Manual Technical Support
Anvyl
Spartan-6 FPGA Trainer Board
Features
  • Programmable over USB-JTAG port, from the on-board SPI Flash ROM, or from USB memory stick
  • Voltage regulator circuits from Analog Devices create the required 3.3V, 1.8V and 1.2V supplies from the main 5V supply
Key Specifications
Logic Cells
6,822 slices
LUTs
4
Flip-flops
8
Block RAM
2.1 Mbits
SRAM
2MB
Clock tiles
four (eight DCMs and four PLLs)
DDR2
128MB
DSP Slices
58
Internal clock
500MHz+
Quad-SPI Flash
16MB
Ethernet
10/100
Connectivity and On-board I/O
Video output
1 HDMI out
VGA
12-bit VGA port
LCD
4.3“ wide-format backlit LCD
OLED
128×32 pixel 0.9“ OLED
LED display
3 two-digit seven segment displays
Audio
I2S audio codec
Crystal oscillator
100MHz
USB
USB2 ports for programming
Keypad
16 labeled keys (0-F)
Slide Switches
8
DIP Switches
8 in two groups
Buttons
4 push buttons
I/Os
32
Pmod Connectors
7
LEDs
14 (10 red, 2 yellow, 2 green)
Electrical
Power
5V (2.1mm coaxial) supply
Physical
Width
8.3 in
Length
10.8 in
Design Resources
Master UCF
Anvyl Project Suite
Documentation
Primary IC
Spartan-6 LX45 (XC6SLX45-CSG484-3)
Reference Manual
Schematic

The Anvyl FPGA development platform is a complete, ready-to-use digital circuit development platform based on a speed grade -3 Xilinx Spartan-6 LX45 FPGA. The large FPGA, along with the 100-mbps Ethernet, HDMI Video, 128MB DDR2 memory, 4.3” LED backlit LCD touchscreen, 128×32 pixel OLED display, 630 tie-point breadboard, multiple USB HID controllers, and I2S audio codec, makes the Anvyl an ideal platform for an FPGA learning station capable of supporting embedded processor designs based on Xilinx’s MicroBlaze. The Anvyl is compatible with all Xilinx CAD tools, including ChipScope, EDK, and the free ISE WebPack™, so designs can be completed at no extra cost. The board dimensions are 27.5cm x 21cm.



Tutorials

Example Projects


Additional Resources