Differences

This shows you the differences between two versions of the page.

Link to this comparison view

reference:instrumentation:openlogger:recover-from-corrupt-firmware [2019/02/08 19:52]
Andrew Holzer created
reference:instrumentation:openlogger:recover-from-corrupt-firmware [2019/02/08 20:55] (current)
James Colvin
Line 4: Line 4:
  
   - Connect the OpenLogger via USB to a computer with the Digilent Agent installed.   - Connect the OpenLogger via USB to a computer with the Digilent Agent installed.
 +  - Hold the **Program Button** (PROG, in the opposite corner of the micro USB connector) on the OpenLogger.
 +  - Press and release the **Reset Button** (P32 RST, by the WiFi radio) on the OpenLogger. The red LED1 should blink quickly. ​ The device is now in bootloader mode.
 +  - Release the **Program Button**.
   - Launch WaveForms Live.   - Launch WaveForms Live.
   - In WaveForms Live, add or configure the Digilent Agent and select **Digilent OpenLogger MZ (SN:#)** from the drop-down.   - In WaveForms Live, add or configure the Digilent Agent and select **Digilent OpenLogger MZ (SN:#)** from the drop-down.
-  - Click **Update ​Firmware**.+  - Click **Open**.  
 +  - Click **Load ​Firmware**. 
 +  - Select **OpenLogger MZ** as the device
   - The latest firmware build is selected. You may select an earlier version from the drop-down, or choose Other to upload a local .hex.   - The latest firmware build is selected. You may select an earlier version from the drop-down, or choose Other to upload a local .hex.
-  - Hold the **Program Button** (PROG) on the OpenLogger+  - Click **Flash Selected Firmware**.  
-  - Press and release ​the **Reset Button** (P32 RST, by the WiFi radio) on the OpenLogger. +  - When the firmware has been successfully flashed click **Done**. 
-  - Release the **Program Button**. ​ The red LED1 should blink quickly. ​ The device is now in bootloader mode. +  - Test the new firmware by connecting to the device ​with the **Open** button ​and checking the firmware version in the configuration menu.
-  - Click **Update**. +
-  - Follow the in app instructions to complete the firmware update+
-  - Test the new firmware by connecting to the device and checking the firmware version in the configuration menu.+