Genesys 2

Buy Reference Manual Technical Support
Genesys 2
Kintex-7 FPGA Development Board
Features
  • Programmable over JTAG and Quad-SPI Flash
  • On-chip analog-to-digital converter (XADC)
Key Specifications
FPGA Part #
XC7K325T-2FFG900C
Logic Cells
50,950 logic slices
(4 6-input LUTs & 8 flip-flops each)
Block RAM
16 Mbits
DSP slices
840
CMTs
10, each with PLL
DDR3
1800 MT/s with 32-bit data width
Internal clock
450 MHz+
Quad-SPI Flash
16 MB
Ethernet
10/100/1000 PHY
Connectivity and On-board I/O
Pmod Connectors
5 Pmod ports
VGA
1 VGA connector
HDMI
HDMI Sink and HDMI Source
SD
microSD card connector
USB
HID host for mouse, keyboard,
and USB MSD host for storage
Audio
Audio codec with four 3.5mm jacks
FMC Connector
Fully-populated 400-pin FMC
HPC connector w/ ten GTX lanes
Switches
8
Buttons
6
Electrical
Power
12V ±5 % external power only
Physical
Width
5.8 in
Length
6.8 in

The Digilent Genesys 2 board is an advanced, high-performance, ready-to-use digital circuit development platform based on the latest Kintex-7™ Field Programmable Gate Array (FPGA) from Xilinx. With its high-capacity, high-speed FPGA (Xilinx part number XC7K325T-2FFG900C), fast external memories, high-speed digital video ports, and wide expansions options make the Genesys 2 well suited for data and video processing applications. Several built-in peripherals, including Ethernet, audio and USB 2.0, allow a wide range of other applications. The fully-bonded1) high-speed FMC HPC connector opens the door to great expansion possibilities.



Documentation

Note: Xilinx software tools are not available for download in some countries. Prior to purchasing the Genesys 2, please check the supporting software's availability, as it is required for the board's use.


Tutorials

Example Projects

Note: These example projects are supported in Vivado and Xilinx SDK 2016.4. No further updates are planned.


Additional Resources

1)
With the exception of CLK3_BIDIR