Pmod LS1

Buy Reference Manual Technical Support
Pmod LS1
Infrared Light Detector
Features
  • Infrared light detector with on-board sensitivity adjustment
  • Interface with up to four reflective or transmissive photo detectors
  • Works with Digilent IR Proximity Sensor
  • 6-pin Pmod connector with GPIO interface
Electrical
Bus
Specification Version
1.2.0
Logic Level
3.3V
Physical
Width
1.4 in (3.56 cm)
Length
0.80 in (2.03 cm)
Design Resources
Fritzing Part
Documentation
Primary IC
Reference Manual
Schematic
J1 Pinout
Pin 1
S1
Pin 2
S2
Pin 3
S3
Pin 4
S4
Pin 5
GND
Pin 6
VCC

The Digilent Pmod LS1 (Revision B) allows users to receive signals from multiple optical sensors, such as the popular combination of an IR LED with an IR sensor used in line-following robots.



Example Projects

  • Digilent Pmod IPs are only supported in Vivado and Xilinx SDK versions 2019.1 and earlier.
Microprocessor
Programmable Logic
  • No programmable logic example projects are available for the Pmod LS1
Reference Projects

Additional Resources