myProto Accessory Board Resource Center

The myProto Accessory Board is retired and no longer for sale in the Digilent store.

Welcome to the resource center for the myProto Accessory Board!

Here you will find all the reference materials that Digilent has created for this board, as well as links to any external content we have tracked down. If you are interested in purchasing the myProto board, visit the product page on our main website: myProto Accessory Board

The Digilent myProto accessory board for the NI myDAQ and NI myRIO brings all your myDAQ/myRIO's signals to breadboard connections where they can be easily accessed using simple jumper wires, and even adds several useful I/O devices.

The MSP connector on your myDAQ / myRIO provides power (+5 VDC and ±15 VDC) along with eight configurable digital I/O pins, two analog inputs, and two analog outputs. All of these signals are available and clearly labeled on the signal blocks at the top of the breadboard when plugged into the MSP connector.

Documentation

  • Schematic – Schematic is currently unavailable, please see the reference manual for product detail
  • Reference Manual – Wiki PDF
    • Technical description of the myProto board and all of its features.
  • Sell Sheet – Sell Sheet is currently unavailable, please see the reference manual for product detail
  • Fritzing Part
    • FZPZ - rev 1
    • The Fritzing part that can be uploaded and used to create circuit images.
,