Installing and Using a Terminal Emulator

Introduction

This guide will show the process of installing and configuring a terminal emulator. For Windows this tutorial will be using Tera Term which is an open-source, free, software implemented, terminal emulator. For Linux the tutorial will use PuTTY, which is a free and open-source terminal emulator, serial console, and network file transfer application. Digilent uses these terminal emulators in our demos for communicating through the USB UART and Ethernet on Digilent FPGAs.

Note: For Linux, Digilent uses Ubuntu 16.4, as it is the only distribution supported by Vivado. This and other tutorials may or may not be applicable to other Linux distros.

Prerequisites

  • Windows: 13.3 MB of free hard-drive space for Tera Term.
  • Linux: 611.3 kB of free hard-drive space for PuTTY

Guide

1. Installing a Terminal Emulator

The Windows and Linux links below are a step by step tutorial on installing a Terminal Emulator.

2. Using a Terminal Emulator