Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
learn:instrumentation:tutorials:openscope-mz:update-firmware [2017/06/14 16:04]
Sam K
learn:instrumentation:tutorials:openscope-mz:update-firmware [2017/06/22 17:56] (current)
Sam K
Line 9: Line 9:
 {{section>/​learn/​instrumentation/​tutorials/​openscope-mz/​setup#​Add the OpenScope MZ to WaveForms Live}} {{section>/​learn/​instrumentation/​tutorials/​openscope-mz/​setup#​Add the OpenScope MZ to WaveForms Live}}
  
-Click **Update Firmware** and follow the instructions to update the firmware on the OpenScope MZ. \\ \\ {{ :​reference:​instrumentation:​openscope-mz:​openscope-mz-getting-started-5.png?​nolink |}} \\ +  * Click **Update Firmware** and follow the instructions to update the firmware on the OpenScope MZ. \\ \\ {{ :​reference:​instrumentation:​openscope-mz:​openscope-mz-getting-started-5.png?​nolink |}} \\  
 +  * Review the **Current Firmware Version** on the device and the **Latest Firmware Version** available. 
 +  * Select the desired **Available Firmware Version** 
 +  * Click **Update**. 
 +  * The firmware update should take about 10 seconds and Waveforms Live reports the firmware update progress. 
 +  * Click **Done**. ​ The firmware is now updated.
  
 {{page>/​reference/​software/​waveforms-live/​update-firmware}} {{page>/​reference/​software/​waveforms-live/​update-firmware}}