Differences
This shows you the differences between two versions of the page.
Both sides previous revisionPrevious revisionNext revision | Previous revision | ||
learn:instrumentation:tutorials:openscope-mz:getting-started [2020/05/28 16:28] – [Getting Started with the OpenScope MZ] Alyssa Holzer | learn:instrumentation:tutorials:openscope-mz:getting-started [2023/10/18 19:30] (current) – Alyssa Holzer | ||
---|---|---|---|
Line 1: | Line 1: | ||
====== Getting Started with the OpenScope MZ ====== | ====== Getting Started with the OpenScope MZ ====== | ||
- | This document will walk you through the OpenScope MZ setup process. | + | <WRAP center round important 80%> |
+ | Despite our hopes and effort to create an innovative and low-cost T&M solution, we’ve received consistent negative feedback on the OpenScope MZ and OpenLogger regarding overall reliability that has led us to determine that it is not up to our high standards for our test and measurement products. | ||
+ | |||
+ | Unfortunately, | ||
+ | |||
+ | The materials on this page will remain here as legacy sources. Any Digilent provided support for this material will be extremely limited at best. Thank you for understanding. | ||
+ | </ | ||
+ | |||
+ | This document will walk you through the OpenScope MZ setup process. | ||
-->Setup the Digilent Agent and Connect to the OpenScope MZ(Required)# | -->Setup the Digilent Agent and Connect to the OpenScope MZ(Required)# | ||
Line 7: | Line 15: | ||
{{ youtube> | {{ youtube> | ||
- | The [[/reference/software/digilent-agent/start | Digilent Agent]] is a service that runs in the system tray on Windows, Mac, or Linux and enables WaveForms Live to communicate with Digilent hardware. The Digilent Agent makes it easy to update the OpenScope MZ's firmware, configure Wifi and calibrate the instruments. | + | The [[software:digilent-agent:start| Digilent Agent]] is a service that runs in the system tray on Windows, Mac, or Linux and enables WaveForms Live to communicate with Digilent hardware. The Digilent Agent makes it easy to update the OpenScope MZ's firmware, configure Wifi and calibrate the instruments. |
- **Download and install the Digilent Agent**. | - **Download and install the Digilent Agent**. | ||
- | * [[https://mautic.digilentinc.com/ | + | * [[https://s3-us-west-2.amazonaws.com/ |
+ | * [[https:// | ||
+ | * [[https:// | ||
/* | /* | ||
- | * [[https:// | + | * [[https:// |
- | * [[https:// | + | |
- | * [[https:// | + | |
* [[https:// | * [[https:// | ||
Line 30: | Line 38: | ||
* This will launch waveformslive.com if you have internet access or a locally hosted version of WaveForms Live if not. | * This will launch waveformslive.com if you have internet access or a locally hosted version of WaveForms Live if not. | ||
- Add the Digilent Agent and OpenScope MZ to WaveForms Live. \\ \\ | - Add the Digilent Agent and OpenScope MZ to WaveForms Live. \\ \\ | ||
- | * Click **Add A Device**. \\ \\ {{ :reference:instrumentation: | + | * Click **Add A Device**. \\ \\ {{ reference:test-and-measurement: |
- | * Choose **Agent**. \\ \\ {{ :reference:instrumentation: | + | * Choose **Agent**. \\ \\ {{ reference:test-and-measurement: |
- | * Enter the **hostname or IP address** of the device where the Agent is running and click **Add Device**. \\ Typically the default value " | + | * Enter the **hostname or IP address** of the device where the Agent is running and click **Add Device**. \\ Typically the default value " |
- | * Select the COM port associated with the OpenScope MZ from the drop down. \\ \\ {{ :reference:instrumentation: | + | * Select the COM port associated with the OpenScope MZ from the drop down. \\ \\ {{ reference:test-and-measurement: |
<-- | <-- | ||
Line 43: | Line 51: | ||
\\ \\ | \\ \\ | ||
- | * Click **Update Firmware** and follow the instructions to update the firmware on the OpenScope MZ. \\ \\ {{ :reference:instrumentation: | + | * Click **Update Firmware** and follow the instructions to update the firmware on the OpenScope MZ. \\ \\ {{ reference:test-and-measurement: |
* Review the **Current Firmware Version** on the device and the **Latest Firmware Version** available. | * Review the **Current Firmware Version** on the device and the **Latest Firmware Version** available. | ||
* Select the desired **Available Firmware Version** | * Select the desired **Available Firmware Version** | ||
Line 59: | Line 67: | ||
\\ \\ | \\ \\ | ||
- | - Under the **Calibration** section click **Calibrate**. \\ \\ {{ :reference:instrumentation: | + | - Under the **Calibration** section click **Calibrate**. \\ \\ {{ reference:test-and-measurement: |
- Device specific instructions are provided. | - Device specific instructions are provided. | ||
- Connect the solid red wire to the solid orange wire. | - Connect the solid red wire to the solid orange wire. | ||
- Connect the solid white wire to the solid blue wire. | - Connect the solid white wire to the solid blue wire. | ||
- | - Click **Next** to begin calibration. | + | - Click **Next** to begin calibration. |
- | - The calibration process takes about 30 seconds. | + | - The calibration process takes about 30 seconds. |
- | - The calibration information is displayed. | + | - The calibration information is displayed. |
- The new calibration data has been applied to the instrument and will be applied at boot. | - The new calibration data has been applied to the instrument and will be applied at boot. | ||
Line 76: | Line 84: | ||
- Connect the solid orange wire (Osc Ch 1) to solid yellow wire (AWG Ch 1). \\ \\ | - Connect the solid orange wire (Osc Ch 1) to solid yellow wire (AWG Ch 1). \\ \\ | ||
- Click the power button to turn on the WaveGen. | - Click the power button to turn on the WaveGen. | ||
- | - Click Single to acquire a single buffer of data. \\ \\ {{ :reference:instrumentation: | + | - Click Single to acquire a single buffer of data. \\ \\ {{ reference:test-and-measurement: |
- | - The data is displayed on the chart. | + | - The data is displayed on the chart. |
<-- | <-- | ||
Line 84: | Line 92: | ||
==== Related Links ==== | ==== Related Links ==== | ||
- | * [[/reference/software/waveforms-live/wifi-setup]] | + | * [[software:waveforms-live:wifi-setup]] |
* [[/ | * [[/ | ||
- | * [[/reference/software/waveforms-live/start]] | + | * [[software:waveforms-live:start]] |
- | * [[/reference/software/waveforms-live/reference-manual]] | + | * [[software:waveforms-live:reference-manual]] |
- | * [[/ | + | * [[test-and-measurement: |
- | * [[/reference/software/waveforms-live/add-device]] | + | * [[software:waveforms-live:add-device]] |
- | * [[/reference/software/digilent-instrumentation-protocol/start]] | + | * [[software:digilent-instrumentation-protocol:start]] |
{{tag> | {{tag> | ||
{{include_n> | {{include_n> |