Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revisionBoth sides next revision
learn:instrumentation:tutorials:openscope-mz:calibration [2017/06/07 18:37] – created Sam Klearn:instrumentation:tutorials:openscope-mz:calibration [2017/06/07 18:51] – Sam K
Line 4: Line 4:
  
 Calibration tables are saved in the OpenScope MZ flash in one of two locations: **flash** and **SD**.  The **SD** calibration is intended to be overwritten by the user during normal use.  The **flash** calibration is populated during manufacturing but it can also be overwritten.  Calibration data is applied to the instruments when the OpenScope MZ boots.  If the **SD** calibration exists it will be applied.  If not and the **flash** calibration exists it will be applied.  If neither the **SD** nor **flash** calibrations exist the ideal calibration will be applied to the instruments. Calibration tables are saved in the OpenScope MZ flash in one of two locations: **flash** and **SD**.  The **SD** calibration is intended to be overwritten by the user during normal use.  The **flash** calibration is populated during manufacturing but it can also be overwritten.  Calibration data is applied to the instruments when the OpenScope MZ boots.  If the **SD** calibration exists it will be applied.  If not and the **flash** calibration exists it will be applied.  If neither the **SD** nor **flash** calibrations exist the ideal calibration will be applied to the instruments.
 +
 +<WRAP todo>Video Here</WRAP>
  
 ==== Calibration Process ==== ==== Calibration Process ====